Home > News

News
Hot product
Contact us

Email: oumurs1@oumurs.com

Tel:0086 2036297916

Addr. 2nd Floor Building E,ShaLuo Industrial Zone,Shicha Street Baiyun District Guangzhou

Introduction piston and piston ring

08 Oct 2016 - piston ring,piston kit
       A piston is a cylindrical engine component that slides back and forth in the cylinder bore by forces produced during the combustion process. The piston acts as a movable end of the combustion chamber. The stationary end of the combustion chamber is the cylinder head. Pistons are commonly made of a cast aluminum alloy for excellent and lightweight thermal conductivity. 

     Thermal conductivity is the ability of a material to conduct and transfer heat. Aluminum expands when heated, and proper clearance must be provided to maintain free piston movement in the cylinder bore. Insufficient clearance can cause the piston to seize in the cylinder. Excessive clearance can cause a loss of compression and an increase in piston noise.
      QQ截图20160918091558
     A ring groove is a recessed area located around the perimeter of the piston that is used to retain a piston ring. Ring lands are the two parallel surfaces of the ring groove which function as the sealing surface for the piston ring.

     A piston ring is an expandable split ring used to provide a seal between the piston an the cylinder wall. Piston rings are commonly made from cast iron. Cast iron retains the integrity of its original shape under heat, load, and other dynamic forces. Piston rings seal the combustion chamber, conduct heat from the piston to the cylinder wall, and return oil to the crankcase. Piston ring size and configuration vary depending on engine design and cylinder material.

     Piston features include the piston head, piston pin bore, piston pin, skirt, ring grooves, ring lands, and piston rings. The piston head is the top surface (closest to the cylinder head) of the piston which is subjected to tremendous forces and heat during normal engine operation.
A piston pin bore is a through hole in the side of the piston perpendicular to piston travel that receives the piston pin. A piston pin is a hollow shaft that connects the small end of the connecting rod to the piston. The skirt of a piston is the portion of the piston closest to the crankshaft that helps align the piston as it moves in the cylinder bore. Some skirts have profiles cut into them to reduce piston mass and to provide clearance for the rotating crankshaft counterweights.

     Guangzhou Oumurs Motorcycle Parts CO.,LTD is a motorcycle spare parts supplier,which special at the range for 16years,manufacturing a srew to the whole motorcycle. The main production included piston kit, coil, rocker arm cylinder kit rtc. Wanting  any motor parts choose Oumurs is a good choice.
Contact Us
  • Tel: 0086 2036297916

  • Fax: 0086 2036297917

  • E-mail:oumurs1@oumurs.com

  • Addr. 2nd Floor Building E,ShaLuo Industrial Zone,Shicha Street Baiyun District Guangzhou

Technical support:

Baiila

                                                 Copyright © Guangzhou Oumurs Motorcycle Parts Co,Ltd -- All rights reserved

Registration no. :25252

facebook youtube instgrame twitter pintester linking google+